 |
LONG TRAVEL SUSPENSION
As one of the most trusted names in offroad light truck
suspension systems, Fabtech breaks into the ATV market with
their cutting edge Yamaha Rhino Long Travel suspension system.
Designed as a complete system, the front and rear control arms
feature 1.25 OD .120 wall 4130 Chromoly tubing with dimple die
gusset plates for unsurpassed strength. Arms mount to the frame
via graphite impregnated Delrin bushings. Front upper arms
utilize 3/4 " teflon lined heim ends with lower arms receiving 7/8”
uniballs for an unrestricted 13” of usable wheel travel. Working in
conjunction with the wider track width and travel, Fabtech
includes steering rod extensions with 1/2 “ heim ends. This
system is available with replacement 4340 heat treated axle
shafts for aggressive driving or with complete heavy duty CV
axle assemblies.
The heart of this system is Fabtech's Dirt Logic 2.0 Resi Coilover
shocks. These shocks contain components from Fabtech's race
shock line for maximum durability. Extensive ride work was
performed to dial in the shock valving for aggressive high speed
offroad driving while still providing a comfortable low speed ride
for cruising around campsites and pits.
All components included in this system are finished in a neutral
gun metal gray powdercoat to blend with the undercarriage of
every Rhino. Systems come complete with all the necessary
parts and hardware for a one stop purchase.
Suspension dimensions compared to stock
Width - 6” wider per side
Height - 3” taller
Wheelbase - 4” longer overall,
2” front and 2” rear
Installation specs-
Install time - 4 hours w/extended length axle shaft kit
2 hours w/CV assembly axle kit
Welding required- No
Cutting required- No
Tires and Wheels-
Stock tires and wheels- Yes
Aftermarket sizes-
Tires- Front 26X9R12 Rear 26x12R12*
Wheels- 12 x 7 w/ 5+2 offset
* May require trimming of plastic fender
|
| 2008 Yamaha Rhino |
| |
| 1 |
FTR10079 |
Component Box 1 |
|
| 1 |
FTR10013 |
Component Box 2 |
|
| 1 |
FTR10080 |
Component Box 3 |
|
| |
| 2005-2007 Yamaha Rhino |
| |
| 1 |
FTR10012 |
Component Box 1 |
FTR10012,14I |
| 1 |
FTR10013 |
Component Box 2 |
FTR10013I |
| 1 |
FTR10014 |
Component Box 3 |
|
| |
| 2005-08 Rhino |
| These precision laser cut pieces will add a finished look to any Rhino. Attaches with factory hardware or can be installed with optional stainless nut insert kit. |
| 1 |
FTR10032 |
|
|
| |
| 2005-08 Rhino |
| As a replacement to the factory trim hardware this kit provides stainless steel fasteners for a refined installation of Fabtech trim pieces. Kit includes all the necessary hardware and installation tool to install Fabtech’s Bed Caps and the Dash Trim Ring kit along with additional hardware to replace the remaining bed plastic caps. |
| 1 |
FTR10007 |
|
|
| |
| 2005-08 Rhino |
| Protect the top of the bed rails from scratches and dents with Fabtech’s Bed Caps. Available in satin Stainless Steel or Black Powdercoated steel construction. Attaches with factory hardware or can be installed with optional stainless nut insert kit. |
| 1 |
FTR10040 |
Stainless |
|
| 1 |
FTR10040BK |
Black |
|
| |
| 2005-08 Rhino |
| Finish off the lower edging of the bed with these trim guards. Constructed of satin Stainless Steel or Black Powdercoated steel. Includes stainless mounting hardware. |
| 1 |
FTR10038 |
Stainless |
|
| 1 |
FTR10038BK |
Black |
|
| |
| 2005-08 Rhino |
| When your friends need a little help getting unstuck use our billet hitch hook to secure a tow line. Fits into the Rhino stock receiver hitch. Not for use on vehicles over 1,100 lbs GVW. |
| 1 |
FTR10053 |
|
|
| |
| 2005-08 Rhino |
| Finish off the rear frame appearance of your Rhino with these polished billet caps. The Pair of caps insert into the rear frame horns for a refined custom look. |
| 1 |
FTR10059 |
|
|
| |
| 2005-08 Rhino |
Machined and high polished our tailgate latches will add the finishing touch to the exterior of any Rhino. The attention to detail in the machining process includes finger grips and horizontally cut bars. Sold in pairs with Fabtech logo or plain. |
| 1 |
FTR10049 |
w/Logo |
|
| 1 |
FTR10050 |
w/o Logo |
|
| |
| 2005-08 Rhino |
These custom machined billet aluminum mirrors have strong mounting arms that securely fasten the 3” round mirror to the stock cage or 1.75 ” OD tubing. Sold in pairs. |
| |
FTR10048 |
|
|
| |
| 2005-08 Rhino |
High polished billet shifter knob will accent the area between the seats for a true custom interior appearance. The polished finish is smooth to the touch for comfort. |
| |
FTR10051 |
|
|
| |
| 2005-08 Rhino |
High polished billet shifter knob will accent the area between the seats for a true custom interior appearance. The polished finish is smooth to the touch for comfort. |
| |
FTR10052 |
|
|
| |
| 2005-08 Rhino |
These weld on gussets surround the control arm pivot holes on the factory frame to provide additional surface area, reducing the possibility of tearing. This gusset kit is compatible with stock and aftermarket suspensions that utilize the factory control arm pivot holes. |
| 1 |
FTR10015 |
|
|
| |
| 2005-08 Rhino |
This system replaces the factory tie rod assemblies for use in rugged offroad terrain. Consisting of inner and outer
3 /4” Teflon lined Heim ends with 1” OD .120 wall DOM tubing these new tie rod assemblies directly replace the stock steering on + 6” Long Travel systems. |
| 1 |
FTR10006 |
|
|
| |
| 2005-08 Rhino |
These Spindles are constructed of Ductile Iron with a structural webbing to handle increased impact loads. Fabtech offers these as a bolt-on replacement for the stock Spindles or as an addition to their Long Travel Kit. Each pair of Spindles are available with the bearings & seals pre-installed, making for a quick and easy install, or without. |
| 1 |
FTR10071 |
Stock w/o Bearings & Seals (pair) |
|
| 1 |
FTR10072 |
Long Travel w/o Bearings & Seals (pair) |
|
| 1 |
FTR10073 |
Stock w/Bearings & Seals (pair) |
|
| 1 |
FTR10074 |
Long Travel w/Bearings & Seals (pair) |
|
| |
| 2005-08 Rhino |
This rear 1.5” OD tubular bumper wraps around the corners of the bed to provide side and rear protection. The bolt on design attaches directly to the frame for maximum protection. Note that due to this frame mounted design the bed will not tilt. Bumper is available in a black powdercoat finish. |
| 1 |
FTR10005BK |
Black |
|
| |
| 2005-08 Rhino |
Dirt Logic 2.0 Shock w/Resi |
| 1 |
FTR60132 |
Front (pair) |
|
| 1 |
FTR60135 |
Rear (pair) |
|
Dirt Logic 2.0 Long Travel Shock w/Resi |
| 1 |
FTR60138 |
Front (pair) |
|
| 1 |
FTR60141 |
Rear (pair) |
|
| |
| 2005-08 Rhino |
Obtain increased front end protection with Fabtech’s 1.5” OD tubular Bumper and Skid Plate. Bumper mounts directly to the frame without drilling and has provision for up to four auxiliary lights. The 3/16” think aluminum skid plate is laser cut and lined grained for an exceptional finish. Bumper is available in black powdercoat finish. |
| Front Bumper & Skid Plate w/Over Rider |
| 1 |
FTR10004BK |
Black |
|
| |
| 1 |
FTR10019BK |
Front Bumper & Skid Plate w/o Over Rider Bar |
|
| |
| 1 |
FTR10060 |
Tilt Bed Handle Cover |
|
| |
| 1 |
FTR10009 |
Diff Support Kit |
|
| |
| 1 |
FTR10054 |
FMF PowerLine Muffler (660 only) |
|
| |
| 1 |
FTR10055 |
FMF PowerCore 4 Exhaust (660 only) |
|
| |
|
 |
RHINO SPINDLE
Fabtech introduces their new Heavy Duty Spindles for the Yamaha Rhino. These Spindles are constructed of Ductile Iron with a structural webbing to handle increased impact loads. Fabtech offers these as a bolt-on replacement for the stock Spindles or as an addition to their Long Travel Kit. Each pair of Spindles are available with the bearings & seals pre-installed, making for a quick and easy install, or without. |
 |
REAR DIFFERENTIAL
SUPPORT KIT
Under aggressive driving conditions the rear differential
housing can experience heavy torque loads that can cause
cracking of the aluminum housing. This support kit aids in
securing the rear differential housing for extreme offroad use. |
 |
CONTROL ARM
FRAME GUSSETS
These weld on gussets surround the control arm pivot
holes on the factory frame to provide additional surface
area, reducing the possibility of tearing. This gusset kit
is compatible with stock and aftermarket suspensions
that utilize the factory control arm pivot holes. |
 |
REPLACEMENT
HEIM STEERING
This system replaces the factory tie rod assemblies for use in rugged
offroad terrain. Consisting of inner and outer 3 /4” Teflon lined Heim
ends with 1” OD .120 wall DOM tubing these new tie rod assemblies
directly replace the stock steering on + 6” Long Travel systems. |
 |
DIRT LOGIC 2.0
The Dirt Logic 2.0 Coilovers directly replace the front and rear shocks on Rhino’s
with stock suspension or with Fabtech’s Long Travel system. Extensive ride work
has resulted in a supple ride at low speeds for cruising around camp with superior
dampening capacity at high speeds for those aggressive trail rides.
• 2” OD Threaded Nickel Plated Steel Body
• 2.25” OD Steel Reservoir
• Large 7/8” OD Induction Hardened Chrome Piston Rod
• Preset valving for optimum ride quality at all speeds
• Adjustable Coilover construction
• Eibach Coil Springs for increased off road life
• 6061 T6 Polished and Anodized Billet Components
• Aluminum Extended Rod ends with Teflon Bearings
• Includes Reservoir mounting system
Stock Replacement Shock Features
-6 Stainless steel O-Ring Resi Hose
Spring Rate: Front- 250LB Rear- 450LB
Long Travel Shock Features
-8 Braided Cloth O-Ring Resi Hose
Spring Rate: Front- 200LB Rear- 300LB
Enlarged Rod Guide & DU Bushing
Robust Top Cap assembly
Billet Back Up Schrader Cap
|
 |
|
 |
REAR BUMPER
This rear 1.5” OD tubular bumper wraps around the corners of the bed to provide side
and rear protection. The bolt on design attaches directly to the frame for maximum
protection. Note that due to this frame mounted design the bed will not tilt. Bumper
is available in Black Powdercoat or raw for paint to match applications. |
 |
BED CAPS
Protect the top of the bed rails from scratches and dents with Fabtech's Bed Caps.
Available in satin Stainless Steel or Black Powdercoated steel construction. Attaches
with factory hardware or can be installed with optional stainless nut insert kit. |
 |
LOWER BED VALANCE GUARDS
Finish off the lower edging of the bed with these trim guards. Constructed of satin
Stainless Steel or Black Powdercoated steel. Includes stainless mounting hardware. |
 |
FRONT BUMPER W/OVER RIDER BAR
Obtain increased front end protection with Fabtech's 1.5” OD tubular Bumper and Skid Plate. Bumper mounts directly
to the frame without drilling and has provision for up to four auxiliary lights. The 3/16” think aluminum skid plate
is laser cut and lined grained for an exceptional finish. Bumper is available in Black Powdercoat
or raw for paint to match applications. |
 |
DASH TRIM RINGS
Refine the look of your Rhino dash with these satin stainless trim rings. These precision
laser cut pieces will add a finished look to any Rhino. Attaches with factory hardware or
can be installed with optional stainless nut insert kit.
STAINLESS NUT INSERT KIT
As a replacement to the factory trim hardware this kit provides stainless steel fasteners
for a refined installation of Fabtech trim pieces. Kit includes all the necessary hardware
and installation tool to install Fabtech's Bed Caps and the Dash Trim Ring kit along with
additional hardware to replace the remaining bed plastic caps. |
 |
BILLET SIDE MIRROR PAIR
These custom machined billet aluminum mirrors have strong mounting arms that securely fasten the 3” round mirror to the stock cage or 1.75 ” OD tubing. Sold in pairs.
|
 |
BILLET TAILGATE LATCH KIT (NO LOGO)
Machined and high polished our tailgate latches will add the finishing touch to the exterior of any Rhino. The attention to detail in the machining process includes finger grips and horizontally cut bars. Sold in pairs with Fabtech logo or plain. |
 |
|
 |
TAILGATE LATCH KIT (LOGO)
Machined and high polished our tailgate latches will add the finishing touch to the exterior of any Rhino. The attention to detail in the machining process includes finger grips and horizontally cut bars. Sold in pairs with Fabtech logo or plain.
|
 |
BILLET HEADLIGHT SWITCH KNOB
Dress up your Rhino dash with our polished billet switch knob. Directly replaces the stock knob for a finished look. |
 |
BILLET SHIFTER KNOB
High polished billet shifter knob will accent the area between the seats for a true custom interior appearance. The polished finish is smooth to the touch for comfort.
|
 |
BILLET TOW CLAW
When your friends need a little help getting unstuck use our billet hitch hook to secure a tow line. Fits into the Rhino stock receiver hitch. Not for use on vehicles over 1,100 lbs GVW.
|
 |
TILT BED HANDLE COVER
This polished billet
accessory has been
designed for Rhino's that
have eliminated the
factory tilt bed
mechanism. The billet
plate covers the tilt bed
handle area on the body
and will add a touch of
refinement to any Rhino.
|
 |
FRAME HORN CAPS
Finish off the rear frame appearance of your Rhino with these polished billet caps.
Each cap inserts
into the rear
frame horns for
a refined
custom look.
|
 |
FMF POWERLINE MUFFLER
The PowerLine muffler is a must have bolt-on for any Rhino requiring additional power. This is a completely mechanical design built from durable, high strength stainless steel for years of service.
- Performance gains throughout RPM range
- Mechanical design, no packing to blow out
- Stainless steel construction will never melt through or rust
- USFS approved spark arrestor
- Fits all 660 Yamaha Rhino's only
FMF POWERCORE 4 EXHAUST SYSTEM
The PowerCore 4 is constructed from 100% U.S. stainless steel for superior durability. The mechanical design of the muffler means no packing to blow out overtime. The internal housing consists of a series of precise baffles and chambers to lower sound and perform better than stock. As an added benefit, the PowerCore 4 is considerably lighter than any stock utility exhaust and has Forestry approved spark arrestor.
- Increased torque and better performance
- Mechanical design, no packing to blow out
- Stainless steel construction will not melt through or rust
- USFS approved spark arrestor.
- Optional sound inserts available
- Made 100% in house at FMF Racing
- Fits all 660 Yamaha Rhino's only
|
 |
