4wd 87-95 yj

back to home

JEEP YJ 8” CRAWLER SYSTEM
In the late eighties and early nineties the Jeep YJ dominated the trail only to be replaced by the more capable TJ in 1997. Fabtech revitalizes the capability of the YJ with the introduction of our high end 8” Crawler System for 1987-1995 Jeep YJ’s. As a bolt on installation this system replaces the factory front leaf springs with our Dirt Logic 2.5 Coilover shocks and tubular Radius Arms as found in our TJ Crawler systems. The rear features a spring over design with Soft Ride Leaf Springs, extended length Shackles and a Floating Traction Bar. This Crawler suspension can be order as a complete system or as a separate front and rear system. Install this Crawler system with our optional high clearance 1/ 4” thick steel transfer case skid pan on your YJ and you’ll leave the TJ guys behind.

FRONT SUSPENSION
Heavy duty 1 /4” thick steel axle and frame bracketry attaches the thick wall adjustable Radius Arms to the factory front axle housing or aftermarket TJ style axles for heavy duty trail use. Large 2” diameter adjustable Radius Arms have a 5/16” thick steel wall with giant 2 5/8” forged link ends for unsurpassed strength and maximum impact resistance. The tubular Coilover system secures to the side of the frame and motor mounts providing a solid structure for the Dirt Logic 2.5 Coilover shock. Installation of these Coilover mounts do not require cutting of the inner fenderwell, keeping mud and water away from the motor. The front system also includes a replacement Trac Bar, Pitman Arm, Quick Disconnect sway bar links, bump stops and more.

REAR SUSPENSION
As an option to the front system our rear suspension design includes a bolt on bracket system converting the leaf springs to the top of the axle. We provide a 4 leaf Soft Ride Leaf Spring with nylon glide pads between each leaf for friction free operation. To work in conjunction with the Soft Ride Leaf Springs we provide extended length boomerang shackles that offer over 14” of wheel travel with superior articulation. A weld on Floating Traction Bar system is included to reduce spring wrap and increase tire traction. This rear system is compatible with the stock axle housing and most aftermarket housings that have been set up with the factory YJ leaf spring pad geometry.

JEEP YJ 3.5” PERFORMANCE SYSTEM
Heavy duty front and rear leaf spring springs feature nylon glide pads between each leaf for a friction free ride. Front springs employ 5 leafs while rear springs are comprised of a 4 leaf pack. Front and rear spring eyes are constructed with a full military style wrap for superior strength and dependability. The transfer case is relocated via billet spacers that allow the use of the stock skid plate. This system comes complete with a drop pitman arm, extended sway bar links, track bar relocation brackets and more.

Jeep YJ 1987-1995 All Models
3.5" Performance System
Use 33/1250R15 tires w/ 15x7 wheels w/ 3 3/4" BS w/ minor trimming
1	K4022	Kit Reference Number w/Performance Shocks
1	FTS24004	Component Box	FT24004I
2	FTS44005	Front Leaf Springs	FT24048I
2	FTS44006	Rear Leaf Springs
2	FTS7181	Performance Front Shocks
2	FTS7182	Performance Rear Shocks
8" Crawler Coilover Conversion w/Stock Axle(1)(2)(3)
Use 35/1350R15 tires w/ 15x8 wheels w/ 3 3/4" BS w/ minor trimming
1	K4023	Kit Reference Number w/Performance Rear Shocks
1	K4023D	Kit Reference Number w/Dirt Logic Rear Shocks
1	FTS24046BK	Component Box Crawler Coilover Frt.(4)	FT24046i
1	FTS24048BK	Shackle & Spring Hanger RR Kit	FT24048I
2	FTS44016	Long Travel Leaf Springs RR(6)
Order two of the below rear shocks
2	FTS6002	Performance Rear Shocks
2	FTS81043	Dirt Logic Non Resi
8" Crawler Coilover Conversion w/aftermarket Axle Housings(1)(2)(3)(5)
Use 35/1350R15 tires w/ 15x8 wheels w/ 3 3/4" BS w/ minor trimming
1	K4024	Kit Reference Number w/Performance Rear Shocks
1	K4024D	Kit Reference Number w/Dirt Logic Rear Shocks
1	FTS24047BK	Component Box Crawler Coilover Frt.(4)	FT24046i
1	FTS24048BK	Shackle & Spring Hanger RR Kit	FT24048i
2	FTS44016	Long Travel Leaf Springs RR(6)
Order two of the below rear shocks
2	FTS6002	Performance Rear Shocks
2	FTS81043	Dirt Logic Non Resi

Footnotes
1	Exhaust modification required.
2	Fixed yoke kit required use FTS94004.
3	CV style rear drive shaft required use FTS94032.
4	Truck Freight Only.
5	Front aftermarket axle housing must have same bracket as stock TJ. Rear aftermarket axle housing must have same spring pad geometry as factory.
6	Will not fit into stock rear spring hanger brackets.

ACCESSORIES
Steering Stabilizers
1	FTS8007	YJ Steering Stabilizer - 3.5" System only
1	FTS24049	YJ Steering Stabilizer - 8" Crawler System only
Pitman Arm
1	FTS94018	Jeep TJ & YJ Pitman Arm
Rear Axle Housing Shim Kits
1	FTS94022	YJ Rear Spring Shim Kit
Joint Rebuild Kits
1	FTS94009	Small Joint Rebuild Kit Large Joint	FT94001I
1	FTS94010	Large Joint Rebuild Kit Large Joint	FT94002I
1	FTS94033	Crawler Wishbone Uni Ball Replacement
1	FTS94034	Crawler Wishbone Upper Bushing Kit
Skid Plates
1	FTS94031BK	YJ All Transfer Case Skid
1	FTS94035BK	YJ Steering Box Skid Plate	FT94035I
Drive Train
1	FTS94004	NP231 Fixed Yoke Kit - TJ / YJ
1	FTS94032	Fixed Yoke RR CV Driveshaft - YJ
Body Armor
Standard Jeep Models
1	FTT94009BK	YJ Short Corner Guards	FT94009I
1	FTT94010BK	YJ Rocker Guards
Rear Traction Bar(2)
1	FTS94041	Jeep YJ 87-95 Rear Single Traction Bar
Tubular Front Bumper
1	FTT10035BK	Jeep YJ Front Bumper	FT10035I

	JEEP SHORT CORNER GUARDS Obtain maximum body protection from trees and rocks with our 3/16” thick steel corner guards. The super thick corner guards are available powdercoated black and are attached using flush countersink hardware for smooth appearance. Corner Guards will accept the factory tail light assembly or our LED tail light conversion kit for a clean offroad look.
	YJ TRANSFER CASE SKID PLATE This optional heavy duty 1/4” thick steel skid pan comes with a high density plastic skid plate cover that provides the ultimate in protection when crawling big rocks. The Transfer Case Skid Plate is compatible with our 3.5” Performance and 8” Crawler systems.
	JEEP ROCKER GUARD If crawling over mega sized rocks is what your Jeep lives for, then protect the rocker panels with our super thick Rocker Guards. Built from 1/4” thick steel, formed to provide maximum dent resistance to the bottom and side rocker panels of most popular model Jeeps. Available in black powdercoat with flush countersink hardware for smooth appearance.
	FIXED YOKE KIT In order to use a CV style rear driveshaft on lifted Jeep’s with steep pinion angles the rear output shaft of the Transfer Case must be converted to a fixed yoke. Our Fixed Yoke conversion system comes complete with all the necessary components to accommodate a CV driveshaft on Jeep New Process 231 transfer cases.
	CV DRIVESHAFT These high quality driveshaft are available as a complete assembly to be used in conjunction with our Fixed Yoke Transfer Case conversion systems. The Constant Velocity joint in these driveshafts are designed to provide smooth operation at all speeds.
	STEERING BOX SKID PLATE Protect the steering box of your Jeep from rock impacts with our 1/4” thick steel skid plate. This heavy duty one piece welded unit bolts to the frame for easy installation.
	TUBULAR STEEL BUMPER The 1 3/4” tubular steel bumper replaces the stock unit and allows use of a Warn 9000lb winch and two auxiliary lights. Includes a 3/16” thick steel skid plate and two 3/4” shackles.

Footnotes (ACCESSORIES)
1	Factory rear sway bar may not work w/ aftermarket axle.
3	Driveshaft modification required.
2	Welding required.
13	For off road use only.
15	Housing must be drilled & tapped to accept bracket, see diagram, contact Dynatrac for machining.


3D Kit Viewer
JEEP YJ 8” CRAWLER SYSTEM 1987-1995 FRONT	view kit small
JEEP YJ 8” CRAWLER SYSTEM 1987-1995 FRONT	view kit large

JEEP YJ 8” CRAWLER SYSTEM 1987-1995 REAR	view kit small
JEEP YJ 8” CRAWLER SYSTEM 1987-1995 REAR	view kit large